General

A fuse is an element for protecting the electrical system. A fuse will trip (i.e. it will blow) in the event of a failure or improper interventions in the electrical system.

If an electrical device is not working, check whether the respective fuse is blown. The conductor A-fig. 40 should be intact. If it is not, replace the fuse with another with the same amperage (same color).

B - Undamaged fuse.

C - Fuse with broken filament.

Remove the blown fuse with the tongs provided D, which can be found in the

Remove the blown fuse with the tongs provided D, which can be found in the fuse box.

Never replace a broken fuse with anything other than a new fuse. Always use

Never replace a broken fuse with anything other than a new fuse. Always use a fuse of the same color.

FIRE RISK. Never change a fuse with another amperage:

FIRE RISK.

Go to a Fiat Dealership. Do not attempt to repair a blown MAXI-FUSE.

Go to a Fiat Dealership.

the other electric devices have been turned off/disabled. Before changing a fuse, check the ignition key has been removed and that all the other electric devices have been turned off/disabled.

The fuses in the Fiat Doblò are grouped in two fuse boxes, one located in the If the fuse blows again, have the vehicle inspected at a Fiat Dealership.

The fuses in the Fiat Doblò are grouped in two fuse boxes, one located in the dashboard and the other in the engine compartment.

Press in the points shown in fig. 41 to remove the cover and reach the fuses.

Refer to the table on the following pages to identify the fuses.

To reach the fuses in the engine compartment fuse box, release the tabs A-fig.

To reach the fuses in the engine compartment fuse box, release the tabs A-fig. 42 and remove the cover B.

Refer to the table on the following pages to identify the fuses.

NOTE: The glow plug fuse (60 A) is built into the pre-cabled section but it is positioned aside the engine compartment fuse box inside the cover shell so it can be friendly reached.

Fuse summary table

    See also:

    Hazard Warning Flashers
    The Hazard Warning flasher switch is located on the instrument panel below the radio. Press the switch to turn on the Hazard Warning flashers. When the switch is activated, all directional turn ...

    Operation
    When the shift lever is in the AutoStick position (to the left of the Drive position), it can be moved forward and rearward. This allows the driver to manually select the transmission gear being u ...

    Low engine oil pressure
    Turning the key to MAR the warning light on the dial turns on, but it should go off as soon as the engine is started. If the warning light turns on when the car is travelling (on certain ver ...