Ceiling lights

With toggling lens

To replace a bulb:

1) Remove the ceiling light fig. 35 by releasing the clipped on lens frame in the point shown by the arrow.

2) Open the container A-fig. 36 and replace the burnt-out bulb.

With map reading lights

With map reading lights

To replace a bulb:

1) Remove the ceiling light A-fig. 37 by releasing the clipped on lens frame in the point shown by the arrow.

2) Open the bulb container A-fig. 38.

3) Replace the burnt out bulb.

Boot light

    See also:

    Engine codes - bodywork versions
    EUROPEAN HOMOLOGATION HOMOLOGATION FOR SPECIFIC MARKETS EUROPEAN HOMOLOGATION HOMOLOGATION FOR SPECIFIC MARKETS EUROPEAN HOMOLOGATION HOMOLOGATION FOR SPECIFIC MARKETS EUROPEAN HOMOL ...

    Speed limit exceeded
    The warning light on the dial turns on (on certain versions together with the message on the display) when the car exceeds the speed limit set previously (see “Reconfigurable multifunction dis ...

    TIREFIT Kit
    Small punctures up to 1/4 in (6 mm) in the tire tread can be sealed with TIREFIT. Foreign objects (e.g., screws or nails) should not be removed from the tire. TIREFIT can be used in outside temper ...