Several types of bulbs are installed in the vehicle fig. 17:
A Glass bulbs Clipped into position.
To remove them, pull.
B Bayonet connection bulbs Remove from the bulb holder by pressing the bulb and turning it anticlockwise.
C Cylindrical bulbs Remove by pulling away from terminals.
D-E Halogen bulbs To remove the bulb, release the clip holding the bulb in place.
When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping when you are stuck. Re ...
1. Glow Plug Light — If Equipped
The Glow Plug light will flash during engine oil viscosity sensor measurement in cold weather. During this measurement (up to 10 seconds), the starter will be disabled. If the measured oil visc ...
• If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, roc ...