For checking and restoring pressure only

The compressor can be also used just for restoring pressure. Disconnect the quick connection and connect it directly to the tyre valve; in this way the cylinder is not connected to compressor and the sealing fluid will not flow into the tyre.

Cylinder replacement procedure

    See also:

    Recommended Shift Speeds
    To use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following table ...

    To Unlock The Doors And Liftgate
    Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice, within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to ...

    Sidelights and low beams
    The warning light on the dial turns on when sidelights, parking lights or low beams are turned on. ...