Tow hitch installation

The towing device should be fastened to the body by specialized personnel according to any additional and/or integrative information supplied by the Manufacturer of the device.

The tow hitch must comply with the current regulation, with reference to Directive 94/20/EC and amendments.

Install a tow hitch which is suitable for the towing capacity of the vehicle.

Use a unified coupling for the electrical connections. The coupling is generally fitted on a specific mount fastened to the tow hitch.

For electrical connection, a 7 or 13 pole 12VDC coupling must be used (CUNA/UNI and ISO/DIN standards).

Follow the instructions provided by the manufacturer of the vehicle and/or the tow hitch.

Use the specific trailer light fuse box for electrical connections.

An electric brake should be supplied directly by the battery through a cable with a cross section of no less than 2.5 mm2.

In addition to the electrical connection, only the lead for powering an electric brake and the lead to power a light inside the trailer not exceeding 15W may be connected to the vehicle’s electrical system.

For connections use the preset control unit with battery cable no less than 2,5 mm2.

    See also:

    Fuse summary table
    ...

    Restoring the use of the rear seat
    Versions with single seat Perform operations in a reverse order with respect to what previously described for the boot extension operation. To prevent buckles from remaining positioned below th ...

    EZ Entry Feature
    The driver and front passenger seats have an EZ entry feature for rear seat passengers. Pull forward on the release lever, located on the outboard side of the seatback, dump the seatback forward, ...