Loading ramps are available at Line accessory Fiat.
Loading with ramps shall be only carried out with the vehicle stationary and handbrake engaged.
Never move the vehicle with ramps extracted.
Before restarting the vehicle always check that ramps are properly secured into their housings.
To use the rear ramp fig. 137, strictly follow the instructions shown on the plate applied on the left side of the boot.
Max. rear ramp carrying capacity is 250 kg.
To use the side ramp, fig. 138, open the side sliding door, take handle A and take out the ramp as shown by the arrow until locking it.
Warning light check function
The instrument panel performs a check on the following warning lights: ❒ handbrake on/low brake fluid level; ❒ ABS and EBD system; ❒ ESP system on/failure; ❒ “Dualdri ...
Accessing the rear seats
Versions with one sliding side door (on passenger side) From passenger’s side: open the sliding side door. From driver’s side: pull handle Ffig. 59a upwards to tip the seat back. Once you have let ...
Periodically clean the rubber part using special products; TUTELA PROFESSIONAL SC 35 is recommended. If the rubber blades are bent or worn they should be replaced. In any case they should be chan ...