Rear double doors

The double rear doors are fitted with a catch which stops the opening at an angle of approximately 90°.

knock or gust of wind could release the doors and make them close. The catch system is designed to ensure the best comfort in use. An accidental knock or gust of wind could release the doors and make them close.

It is possible to increase the opening angle of the two doors to facilitate loading and unloading operations. Force the doors open. This will allow opening the doors by approximately 180°.

the vehicle is parts on a slope or when it is windy. When open to 180°, the doors are not blocked. Do not use this system when the vehicle is parts on a slope or when it is windy.

Opening the first door from the outside 1-fig. 114

Turn the key to position 2-fig. 115 and pull the door handle in the direction of the arrow.

Turn the key to position 2-fig. 115 and pull the door handle in the direction of the arrow.

Turn the key to position 2-fig. 115 and pull the door handle in the direction of the arrow.

Closing the first door from the outside 1-fig. 114

Turn the key to position 1-fig. 115.

Close the right-hand door 2-fig. 114 completely first and then close the left-hand

door 1-fig. 114. Never close both doors at the same time. Close the right-hand door 2-fig. 114 completely first and then close the left-hand door 1-fig. 114. Never close both doors at the same time.

Opening the first door from the inside 1-fig. 114

Lift lever A-fig. 116 in the direction of the arrow.

Opening the second door 2-fig. 114

Opening the second door 2-fig. 114

After opening the first door, pull handle A-fig. 117 in the direction of the arrow.

IMPORTANT

IMPORTANT

Only use the handle A-fig. 117 in the direction shown in the figure.

The swing doors (where provided) are fitted with a device A-fig.117a that limits their opening.

Take care not to move the rod from its housing; if it is moved by accident

Take care not to move the rod from its housing; if it is moved by accident position  fig. 117b.fig. 117b, restore it to the correct position fig. 117b.

Tailgate

    See also:

    EVIC Control Buttons
    Press the MENU ESC button briefly to access the menu and/or go to next screen or to confirm the required menu option. Press and hold the MENU ESC button (approximately one second) to return to the ...

    Seat Belt Pretensioners
    The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve t ...

    Key Ignition Park Interlock
    This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK prior to rotating the key fob to the LOCK/OFF position. The key fob can only be remov ...