Manual climate control system (where provided)

The climate control system is adjusted manually.

CONTROLS fig. 78

A - Knob for operating the fan and switching the climate control system on and off.

The climate control system can only be switched on when the pointer on this knob is at speed 1, 2, 3 or 4 the knob will light up when the system is on. the led on the knob will light up when the system is on.

Consequently, the climate control system cannot be switched on when the pointer

Consequently, the climate control system cannot be switched on when the pointer is at 0 B - Recirculation slider, to cut out outside air.

B - Recirculation slider, to cut out outside air.

IMPORTANT

This function is particularly useful when the outside air is heavily polluted (in a traffic jam, tunnel, etc.) and when running on dusty roads. You are advised against using this function for long periods, however, especially if there are a lot of people in the vehicle or on cold or rainy days since the windows could mist up effecting visibility and driving.

C- Air temperature knob (warm/cool air mixer).

D - Air distribution knob.

The system uses refrigerating fluid R134a which will not pollute the environment

The system uses refrigerating fluid R134a which will not pollute the environment if it accidentally leaks.

Under no circumstances should fluid R12 be used as this is incompatible with the system’s component parts.

See also:

Controls
(A): Air temperature knob (mixing hot and cold air); (B): Air recirculation on/off button; (C): Fan knob and climate control system on/off; (D): Air distribution knob. ...

To close the bonnet
Proceed as follows: ❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess (D) replace it in its clip; ❒ lower the bonnet at approx. 20 cm from the engine ...

24. Door Ajar
This light will turn on to indicate that one or more doors or the trunk may be ajar. ...