Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode.
• The belt and retractor assembly must be replaced if the seat belt assembly
Automatic Locking Retractor (ALR) feature or any other seat belt function is not
working properly when checked according to the procedures in the Service Manual.
• Failure to replace the belt and retractor assembly could increase the risk of injury in collisions.
Adding Washer Fluid
The windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be checked at regular intervals. Fill the reservoir with windshield washer solvent (not engin ...
Main beam headlights
To change the halogen bulb, proceed as follows: 1) Remove the protection cover Cfig. 18 turning it counterclockwise; 2) Release clip A-fig. 19, remove connector B and remove the bulb C. ...
Older Children And Child Restraints
Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forwardfacing in the vehicle. Forward-facing child seats and convertible child seats used in t ...