Air cleaner

REPLACING THE FILTER

1.28V version

1.28V version

Loosen the screws on the side and on the air cleaner cover, remove the cover (A) and remove the filtering element (B) to be replaced.

1.3 Multijet versions

Loosen the screws (A), remove the cover (B) and remove the filtering element (C) to be replaced.

    See also:

    Buzzer warnings
    When the reverse gear is engaged a short acoustic signal is automatically activated. When an obstacle is detected an intermittent buzzer will sound ad follows: ❒ the sound frequency increases ...

    25. Temperature Gauge
    The temperature digital scale shows engine coolant temperature. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily. The gauge pointer will lik ...

    Deactivation
    Turn the ignition key to STOP. At the following starting operation (key at MAR), the sensor will not be reactivated even is the stalk is on (B). In this event, to activate the rain sensor, you have ...