Ceiling light

With toggling lens

With toggling lens

To change the bulb, proceed as follows:

❒ remove the ceiling light by releasing the clipped on lens frame in the point shown by the arrow;
❒ open the container (A) and replace the burnt-out bulb.

With map reading lights

To change the bulb, proceed as follows:

To change the bulb, proceed as follows:

❒ remove the ceiling light (A) as shown by the arrows;
❒ open the container (B) and replace the burnt-out bulb.

    See also:

    Enhanced Seat Belt Use Reminder System(BeltAlert )
    BeltAlert is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert ) to fasten their seat belts. The feature is active whenever the ignition is on ...

    Inefficient abs system
    (amber) Turning the ignition key to MAR the warning light turns on, but it should go off after few seconds. The warning light turns on when the system is inefficient or unavailable. In this ca ...

    General instructions
    Wheel changing and correct use of the jack and spare wheel call for some precautions as listed below. Do not use the jack for loads over the value indicated on the plate. The jack should only be ...