Rear light unit

To change the bulb, proceed as follows:

To change the bulb, proceed as follows:

❒ from inside the car, remove the upper plastic cover (A) with the screwdriver provided to reach fastener (B);
❒ from inside the boot, fit extension (C) on the light cluster fastening nuts;
❒ insert the provided screwdriver (D) in the hole in the extension and loosen the light cluster fastening nuts;
❒ withdraw the connector and loosen the fastening screws shown in the figure by the arrows;
❒ remove the bulbs by pushing them slightly and turning them anticlockwise (bayonet coupling).

The bulbs are arranged inside the light unit as follows:

The bulbs are arranged inside the light unit as follows:

(A) - Side/taillight bulb
(B) - Brake light bulb
(C) - Direction indicator bulb
(D) - Bulb for:

❒ left-hand cluster: rear fog light
❒ right-hand cluster: reversing light.

    See also:

    21. Electronic Stability Control OFF (ESC OFF)Indicator Light
    This light indicates the Electronic Stability Control system (ESC) has been turned off by the driver. ...

    Electric windows
    According to versions, power window controls can be set on the dashboard (in central position) fig. 109, or on driver and passenger door panels fig. 109a. They only work with ignition key at MAR. ...

    Glass Surfaces
    All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the i ...