How to keep the seat belts always in efficient conditions

Observe the following:

❒ Always use the belt with the tape taut and never twisted; make sure that it is free to run without impediments;
❒ After a serious accident, replace the belt being worn at that time, even if it does not appear damaged. Always replace the seat belts if pretensioners have been activated;
❒ To clean the belts, wash by hand with neutral soap, rinse and leave to dry in the shade. Never use strong detergents, bleach or dyes or other chemical substance that might weaken the fibres;
❒ Prevent the reels from getting wet: their correct operation is only guaranteed if water does not get inside;
❒ Replace the seat belt when showing significant wear or cut signs.

    See also:

    EVIC Displays
    EVIC Display Manual Transmission 1 — Temperature Indicator 6 — Message Display 2 — Fuel Level Gauge 7 — Coolant Temperature Gauge 3 — Clock 8 — Digital Speedometer 4 — Odometer 9 — Ice ...

    General information
    Turning on of warning light is accompanied by specific message and/or by buzzer sound where provided by instrument panel. These indications are concise and cautionary and shall not be considered a ...

    (D) Drive Vehicle
    Immediately after injecting sealant and inflating the tire, drive the vehicle 5 miles (8 km) or 10 minutes to ensure distribution of the TIREFIT Sealant within the tire. Do not exceed 55 mph (88 k ...