Seat belt without reel mechanism
To fasten the seat belt: insert the tongue (A) into the buckle (B), until you hear it click.
To unfasten the seat belt: press button (C).
To adjust the belt: slide the webbing in adjuster (D). Pull length (E) to tighten the belt and length (F) to loosen it.
IMPORTANT The belt is adjusted properly when it fits closely across the hips.
Seat belt with three anchor points and reel mechanism
The seat belt has two webbings and a double buckle.
To fasten the seat belt: pull the webbing from your reel gently. Slide the webbing carefully through the retainer by the side of the head restraint without twisting it. Then fasten tongue (A) in buckle (B) (grey with a black button) making the two yellow spot references coincide (one on the tongue and one on the buckle).
Slide out more webbing and insert tongue (C) in buckle (D) (grey with red button).
To unfasten the seat belt: press button (E) and lead the webbing to buckle (B). Then press button (F) (black).
Automatic Transmission — If Equipped
CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Move the shift lever into PARK only after the vehicle has come to a complete stop. • Shift into o ...
Opening/closing the tailgate To open the tailgate from the outside, turn the ignition key in lock fig. 118 and pull handle A in the direction of the arrow. The opening of the boot is made easier b ...
1.4 8V - 1.3 Multijet - 1.9 М versions A - Speedometer (speed indicator) B - Fuel level gauge with reserve warning light C- Engine coolant temperature gauge and max. temperature warning light D ...