Front seat belt height adjustment

Always adjust the height of the seat belt to fit the person wearing it. This

Always adjust the height of the seat belt to fit the person wearing it. This precaution could greatly reduce the risk of injury in case of collision.

Correct adjustment is obtained when the belt passes half way between the end of the shoulder and the neck.

Four different adjustments in height are provided.

To adjust, press button (A) and lower or raise the grip (B).

WARNING

Make the height adjustment when the car is stationary.

WARNING

After adjustment, always check that the slider is anchored in one of the positions provided. To do this, with the button (A) released, exert a further pressure to allow the anchor device to catch if release did not take place at one of the preset positions.

    See also:

    Stain Repel Fabric Cleaning Procedure – IfEquipped
    Stain Repel seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel. • Fo ...

    Steering wheel
    On certain versions the steering wheel can be adjusted in height. Proceed as follows: ❒ move lever (A) to position (1); ❒ adjust the steering wheel; ❒ refit the lever to po ...

    Rear light cluster
    To replace a bulb, proceed as follows: Versions equipped with rear brackets: 1) Working inside the vehicle: remove the plastic cover fig. 25 set on the speaker seat fitting the screwdriver under t ...