Transmitter Battery Replacement

See www.dtsc.ca.gov/hazardouswaste/perchlorate The recommended replacement battery NOTE: Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate The recommended replacement battery is CR2032.

1. Press the mechanical key release button and release the mechanical key to access the battery case screw located on the side of the Key Fob.

Release Button Mechanical Key Release Button

2. Rotate the screw located on the side of the Key Fob using a small screwdriver.

Key Fob Screw Location
Key Fob Screw Location

3. Take out the battery case. Remove and replace the battery observing its polarity

Battery Case Removed
Battery Case Removed

4. Refit the battery case inside the Key Fob and turn the  screw to lock it into place.

    See also:

    Quick heating
    Proceed as follows: ❒ close all dashboard vents; ❒ turn knob (A) to ; ❒ turn knob (C) to 4 ; ❒ turn knob (D) to . ...

    General Information
    This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This dev ...

    Additional checks
    Every 1,000 km or before long journeys, check and top up if required: ❒ engine coolant fluid level; ❒ brake fluid level; ❒ windscreen washer fluid level; ❒ tyre pressur ...