Fuel filler cap

To open the cap, turn it anticlockwise and then remove it.

To open the cap, turn it anticlockwise and then remove it.

During refuelling, secure the cap to the anti-loss device on the flap as shown in the figure.

On certain versions the cap has a keylock: to open it proceed as described below.

Opening the cap with keylock (where provided)

Proceed as follows:

❒ hold the cap still and turn the ignition key anticlockwise;
❒ turn the cap by approximately half a turn anticlockwise and remove it.

The airtight seal of the cap may lead to a slight increase of pressure in the tank. A hissing sound when the cap is removed is therefore quite normal. When refuelling, position the cap on the flap as shown in the figure.

WARNING

Do not put naked flames or lighted cigarettes near the fuel filler hole: danger of fire. Do not bend too close to the hole either so as not to breathe in harmful vapours.

Locking the cap with keylock (where provided)

Proceed as follows:

❒ insert the cap (with the key) and turn it clockwise until it clicks once or more;
❒ turn the key clockwise and remove it. Close the flap.

    See also:

    Five-Speed Manual Transmission
    WARNING! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should always be applied when the driver is not in t ...

    Towing the vehicle
    A tow hitch is provided with the vehicle. To fasten the tow hitch: 1) Remove the tow ring from the tool bag. 2) Remove the flap fig. 46 on the bumper levering with a screwdriver in the point show ...

    Multifunction display
    The “Multifunction display” shows all the useful information necessary when driving, more particularly: ...