Roof rack/ski rack

FASTENERS

3-door versions

Move the seal aside in the points shown in the figure to reach the fasteners.

Move the seal aside in the points shown in the figure to reach the fasteners.

The rear fasteners are in the areas indicated by the printed To make use of the presetting couplings, remove the retainer (A) by operating reference mark O on the rear side windows.

To make use of the presetting couplings, remove the retainer (A) by operating on the relevant catch as shown in the figure.

5-door versions

Move the seal aside in the points shown in the figure to reach the fasteners.

Move the seal aside in the points shown in the figure to reach the fasteners.

The rear fasteners are in the areas indicated by the printed reference mark Attach the roof rack brackets to the fasteners. on the rear side windows.

Attach the roof rack brackets to the fasteners.

To make use of the presetting couplings, remove the retainer (A) by operating on the relevant catch as shown in the figure.

After few kilometers, check that fastening screws are firmly tightened.

IMPORTANT Follow the instructions provided in the kit to the letter for both versions (3 and 5 doors).

Fitting should be entrusted to skilled personnel.

IMPORTANT Never exceed the max. permissible loads (see section “Technical specifications”).

    See also:

    Information about car conditions (at event)
    ❒ Trip computer information. ❒ Headlight aiming position display (with dipped beam headlights on) (C). ...

    Enhanced Accident Response System
    In the event of an impact causing airbag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether ...

    Towing the car
    The tow ring provided with the car is housed in the tool box under the boot mat. TOW HOOK PLUG REMOVAL PROCEDURE To prevent damaging plug (A), proceed as follows: ❒ take the screwdriver ...