To open the bonnet

Proceed as follows:

Proceed as follows:

❒ pull lever (A) in the direction of the arrow;
❒ press lever (B) as shown by the arrow;
❒ open the bonnet and release the rod (C) from its clip at the same time. Insert the end of the rod in its recess (D) on the bonnet.

IMPORTANT Before opening the bonnet, check the windscreen wiper arms are not lifted from the windscreen.

    See also:

    Right-hand stalk
    Windscreen wiper/washer fig. 84 The device will only work when the ignition key is at MAR. POSITIONS fig. 84 0 - windscreen wiper off; 1 - flick wipe; in some versions, four selections are possi ...

    Protection from atmospheric agents
    The main causes of corrosion are the following: ❒ atmospheric pollution; ❒ salty air and humidity (coastal areas, or hot humid climates); ❒ seasonal environment conditions. No ...

    Fix & go (quick tyre repair kit)
    On request the car can be fitted with a quick tyre repair kit, called “Fix & Go”, replacing the common tool kit and the spare wheel. The Fix & Go kit is located in the boot under the moquet ...