General Information

The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions:

• This device may not cause harmful interference.
• This device must accept any interference that may be received, including interference that may cause undesired operation.

for compliance could void the user’s authority to operate the equipment. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

    See also:

    Number plate light
    To change the bulb, proceed as follows: ❒ release the tab (A) and remove the cluster; ❒ turn the bulb holder (B) anticlockwise and remove the bulb (C). ...

    Front sidelights
    To change the bulb, proceed as follows: 1) Remove the protection cover B-fig. 18 turning it counterclockwise; 2) Press tabs A-fig. 21, remove the bulb holder from housing B and remove the bulb C ...

    Additional checks
    Every 1,000 km or before long journeys, check and top up if required: ❒ engine coolant fluid level; ❒ brake fluid level; ❒ windscreen washer fluid level; ❒ tyre pressur ...