The speed memorised can be increased in two ways:
❒ disengaging the device and then memorising the new speed;
❒ keeping the ring (B) pressed at (–) until reaching the new speed which will be memorised automatically.
Each pulse of the ring will correspond to a slight reduction in speed (about 1 km/h), while pressing continuously will correspond to a continuous speed reduction.
The fiat code system
To further protect you car from theft, it has been fitted with an engine immobilising system. This system is automatically activated when the ignition key is removed. An electronic device, in fact, ...
The number of items in the menu depends on the car settings. When travelling, only the “Speed limit” indication is enabled. The “Set-up Menu” enables to perform the following adjustments and/or sett ...
If the battery is flat, it is possible to start the engine using an auxiliary battery with the same capacity or a little higher than the flat one. Proceed as follows: ❒ Connect positive ter ...