Rear window wash/wipe function

This device can only work when the ignition key is at MAR. To switch the rear

This device can only work when the ignition key is at MAR. To switch the rear window wiper on, turn the knurled ring from O to towards the dashboard. On certain versions the rear window and windscreen wiping. To wash the window push the stalk towards the dashboard. On certain versions the rear window and windscreen wiping strokes are synchronised.

“Smart washing” function

On certain versions, pulling the stalk towards the dashboard, with just one movement

On certain versions, pulling the stalk towards the dashboard, with just one movement it is possible to operate the washer jet and the wiper at the same time; indeed, the latter comes into action automatically if the stalk is pulled for more than half a second. The wiper stops working three strokes after releasing the stalk. On certain versions a further “cleaning stroke”, after a few seconds, completes the wiping operation.

    See also:

    General instructions
    Wheel changing and correct use of the jack and spare wheel call for some precautions as listed below. Do not use the jack for loads over the value indicated on the plate. The jack should only be ...

    Operation
    Each time the car is started turning the ignition key to MAR, the Fiat CODE system control unit sends a recognition code to the engine control unit to deactivate the inhibitor. The code is sent o ...

    If an accident occurs
    – It is important to keep calm. – If you are not directly involved in the accident, stop at least ten meters away from the accident. – If you are on a motorway, do not obstruct the emergency lane ...