Windscreen washer/wiper

This device can only work when the ignition key is at MAR.

This device can only work when the ignition key is at MAR.

The stalk can be moved to five different positions:

(A): windscreen wiper off
(B): flick wipe: on certain versions, turning the knurled ring (F), four possible intermittent speeds are obtained (slowest to fastest).

With the stalk in position (B), turning the knurled ring (F), four possible intermittent speeds are obtained:

■ = very slow intermittent
■■ = slow intermittent
■■■ = intermittent medium
■■■■ = fast intermittent

(C): continuous slow;
(D): continuous fast;
(E): fast temporary (unstable position).

Operation in position (E) is limited to the time the lever is held in this position. When the lever is released, it returns to position (A) automatically stopping the wiper.

See also:

Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h: – disconnect connection A; turn counter-clockwise the cylinder to replace and raise it; fit the new cylinder and turn it clockwise; connect conn ...

Rain sensor
The rain sensor is behind the driving mirror in contact with the windscreen and has the purpose of automatically adjust, during the intermittent operation, the frequency of the windscreen wiper ...

Tread Wear Indicators
Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. 1 — Worn Tire 2 — New Tire These indicators are molded into the bottom o ...