This function allows the illumination of the space in front of the car.
With the ignition key at STOP or removed, pull the left-hand stalk towards the steering wheel and operate it within 2 minutes from when the engine is turned off.
At each single movement of the stalk, the staying on of the lights is extended by 30 seconds up to a maximum of 3,5minutes, then the lights are switched off automatically.
Each time the lever is operated, the instrument panel warning light 3 turns on and the display will show the function activation time.
The warning light 3will turn on the first time the stalk is operated and it will stay on until the function is automatically deactivated. Each stalk operation will just extend the staying on of the lights.
Keep the stalk pulled towards the steering wheel for more than 2 seconds.
Tire Identification Number (TIN)
The TIN may be found on one or both sides of the tire, however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the wh ...
Fan speed adjustment
Proceed as follows: ❒ open completely central vents and side outlets; ❒ turn knob (A) to the blue sector; ❒ slider (B) at ; ❒ turn knob (C) to the required speed; ...
Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant fluid and begins working when the fluid temperature exceeds approx. 50 °C. Under normal conditions, the needle should move to different positi ...