Direction indicators

Push the lever to stable position:

Push the lever to stable position:

❒ up (position 1): engage the right-hand direction indicator;
❒ down (position 2): engage the left-hand direction indicator.

Warning light will come on flashing on the instrument or cluster at the same time. will come on flashing on the instrument cluster at the same time.

Indicators are switched off automatically when the steering wheel is straightened.

If you want the indicator to flash briefly to show that you are about to change lane, move the stalk up or down without clicking into position (unstable position). When released the stalk will return to its home position.

    See also:

    Main beams
    The warning light on the dial turns on when the main beams are turned on. ...

    Low engine oil pressure
    (red) EXHAUST OIL (Multijet versions) (red) Low engine oil pressure Turning the ignition key to MAR the warning light turns on, but it should go out as soon as the engine is started. On certa ...

    Technical specifications
    VEHICLE IDENTIFICATION DATA CHASSIS MARKING fig. 1 It is printed on the passenger compartment floor, near the right-hand front seat. It can be reached by lifting the special flap in the carpeting an ...