Main beam headlights

When the knurled ring is at  push

When the knurled ring is at the lever towards the dashboard (stable position). push the lever towards the dashboard (stable position).

The warning light cluster will come on. on the instrument cluster will come on.

Pulling the lever towards the steering wheel again, the main beams are turned off and the dipped beams on.

    See also:

    (C) Injecting TIREFIT Sealant Into The DeflatedTire
    • Always start the engine before turning ON the TIREFIT kit. NOTE: Manual transmission vehicles must have the parking brake engaged and the shift lever in NEUTRAL. • After pressing the Power Butt ...

    Cleaning Headlights
    Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and, therefore, different lens cleani ...

    Fan speed adjustment
    Proceed as follows: ❒ open completely central vents and side outlets; ❒ turn knob (A) to the blue sector; ❒ slider (B) at ; ❒ turn knob (C) to the required speed; ...