According to versions, two or three head restraints can be provided. To remove the head restraints, first remove the rear parcel shelf (see paragraph “Extending the boot”), press button (A) set aside the two supports and take them out.
Certain versions are fitted with three head restraints and central seat with seat belt with three anchoring points and reel.
Remember that the head restraints should be adjusted to support the back of your head and not your neck. Only in this position do they exert their protective action.
To optimise head restraint protective action, adjust the seat back upright and keep your head as close as possible to the head restraint.
External light failure
(amber) The warning light turns on when one of the following lights is failing: – sidelights – brake lights (third brake light excluded) – rear fog guards – direction indicators – numb ...
Using the rear central seat belt
Seat belt without reel mechanism To fasten the seat belt: insert the tongue (A) into the buckle (B), until you hear it click. To unfasten the seat belt: press button (C). To adjust the belt: sl ...
Air bag failure
(red) (where provided) Turning the ignition key to MAR the warning light turns on, but it should go off after few seconds. The warning light stays on glowing steadily if there is a failure in th ...