Clock mode (Clock Mode)

This function is used to set the clock in the 12h (12 hour) or 24h (24 hour) mode. To adjust proceed as follows:

Set date (Date Adjustm.)

    See also:

    Required Maintenance Intervals
    Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. WARNING! • You can be badly injured working on or around a motor vehicle. D ...

    EBD failure
    (red) (amber) The turning on at the same time of warning lights with the engine running indicates an EBD system failure or that the system is unavailable; in this case heavy braking may cause ...

    Front ceiling light
    With toggling lens The light will come on automatically when a front door is opened and go out when the door is closed. Press the short side of the lens to switch the light on and off when the d ...