Set clock

Press button h. Each pulse on the button will obtain increase by one unit. Automatic fast increase is obtained by keeping the button pressed for few seconds. When you are near the required value, release the button and complete adjustment with single presses.

Multifunction display

    See also:

    Rear light cluster
    To replace a bulb, proceed as follows: Versions equipped with rear brackets: 1) Working inside the vehicle: remove the plastic cover fig. 25 set on the speaker seat fitting the screwdriver under t ...

    Protecting the environment
    The devices for curtailing petrol engine emissions are the following: ❒ three-way catalytic converter; ❒ Lambda sensor; ❒ fuel evaporation system. In addition, do not let the ...

    To Open And Close The Hood
    To open the hood, two latches must be released. 1. Pull the bottom of the RED hood release lever, located on the left kick panel, rearward. Hood Release Lever 2. Rotate the safety catch under ...