Five-Speed Manual Transmission

You or others could be injured if you leave the vehicle unattended without WARNING!

You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should always be applied when the driver is not in the vehicle, especially on an incline.

Shift Lever

Shift Lever

Fully press the clutch pedal before you shift gears. As you release the clutch pedal, lightly press the accelerator pedal.

the same time move the gearshift lever to the right and then backward. NOTE: To shift into REVERSE from NEUTRAL, lift the ring under the knob and, at the same time move the gearshift lever to the right and then backward.

Use each gear in numerical order; do not skip a gear. Be sure the transmission is in first gear, not third, when starting from a standing position. Damage to the clutch can result from starting in third gear.

For most city driving, you will find it easier to use only the lower gears. For steady highway driving with light accelerations, fifth gear is recommended.

Never drive with your foot resting on the clutch pedal, and never try to hold the vehicle on a hill with the clutch pedal partially engaged. This will cause abnormal wear on the clutch.

REVERSE gear is not synchronized and the vehicle must be at a complete stop to shift into REVERSE gear. When selecting REVERSE gear, the driver should pause (approximately 2 seconds) after pushing in the clutch pedal and prior to shifting into REVERSE which allows gears to stop spinning. Should an unwanted clash noise be produced, the pause length should be increased.

• Clashing REVERSE gear, especially if vehicle is moving, can result in NOTE:

• Clashing REVERSE gear, especially if vehicle is moving, can result in transmission damage.
• During cold weather, until the transmission lubricant is warm, you may experience slightly higher shift efforts. This is normal and not harmful to the transmission.

    See also:

    Tire Markings
    1 — U.S. DOT Safety Standards Code (TIN) 4 — Maximum Load 2 — Size Designation 5 — Maximum Pressure 3 — Service Description 6 — Treadwear, Traction and Temperature Grades NOTE: • P (Passeng ...

    Tow hitch installation
    The towing device should be fastened to the body by specialized personnel according to any additional and/or integrative information supplied by the Manufacturer of the device. The tow hitch must ...

    Refuelling
    To guarantee full tank filling, carry out two refueling operations after the first click of the fuel delivery gun. Avoid further topping up operations that could cause damages to the fuel system. ...