Normal Starting

or pressing the accelerator pedal. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal.

Turn the ignition switch to theAVV (START) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the STOP (OFF/LOCK) position, wait 10 to 15 seconds, then repeat the Normal Starting procedure.

    See also:

    General considerations
    Car maintenance Have checks and adjustments carried out in accordance with the “Service schedule”. Tyres Check the pressure of the tyres routinely at an interval of no more than 4 weeks: if the p ...

    Child lock
    To prevent opening the sliding side doors from the inside. Engage by inserting the tip of the ignition key as shown in fig. 113 and turning it. Position 1 - device off. Position 2 - device on. T ...

    Accessories purchased by the owner
    If after buying the car, you decide to install electrical accessories that require a permanent electric supply (alarm, satellite antitheft system, etc.) or accessories that in any case burden the ...