14. Electronic Throttle Control (ETC) Light

This light informs you of a problem with the Electronic Throttle Control (ETC)

This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the NEUTRAL position. The light should turn off. If the light remains lit with the engine running, your vehicle will usually be drivable; however, see an authorized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required and you may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may require towing. The light will come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer.

    See also:

    Door lockremote control
    The remote control is built into the ignition key. Press button A-fig. 4 to lock and unlock the doors. Press button A to operate the system. LED B (where required) will flash while the transmitter ...

    Quick windscreen and front side window demisting/defrosting (MAX-DEF function)
    Proceed as follows: ❒ turn knob (A) to ; ❒ turn knob (C) to 4 ; ❒ turn knob (D) to ; ❒ slider (B) at . After demisting/defrosting, operate the controls to restore the ...

    Enhanced Seat Belt Use Reminder System(BeltAlert )
    BeltAlert is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert ) to fasten their seat belts. The feature is active whenever the ignition is on ...